What is grid frequency, and why does it make the lights go off? Simply explained
NERC says the grid ran outside its frequency and voltage limits in October. Here is what those words mean, and what they have to do with your light.
In 30 seconds
- Nigeria's grid is meant to run at a steady 50 Hz. NERC allows it to move only between 49.75 and 50.25 Hz.
- In October, the low and high averages were 49.46 Hz and 50.66 Hz, both outside that band.
- Frequency drops when there is too little power for the demand, and rises when there is too much.
- When it moves too far, safety devices switch off lines and power stations, and areas go dark.
NERC's latest monthly figures say the grid ran outside its safe limits for frequency and voltage in October. Read our report. Those words sound technical. The idea behind them is simple.
Frequency is the grid's heartbeat
The power in your socket is alternating current. It switches direction back and forth, very fast. In Nigeria it is meant to do this 50 times every second. That is 50 hertz, or 50 Hz.
Every power station on the grid spins in step at that speed. Think of a team of rowers who must all pull at the same beat.
Why it moves
Frequency is a sign of balance between supply and demand.
- If people use more power than the stations are making, the machines slow down slightly and frequency falls below 50.
- If stations make more than is being used, for example when a big line trips and its customers drop off, the machines speed up and frequency rises above 50.
NERC allows the grid to move only between 49.75 and 50.25 Hz. In October, its lower average was 49.46 Hz and its upper average 50.66 Hz. Both are outside the band.
Why that turns off your light
Power stations and big lines have safety devices. If frequency moves too far, the devices switch equipment off to protect it. That is called a trip. When one station trips, the others must carry more, and frequency can swing further. If nobody catches it in time, more equipment trips one after another. That is how a grid collapse happens.
To stop that, grid operators sometimes cut supply to some areas on purpose. That is load shedding.
And voltage?
Voltage is the push behind the current. On the high-voltage network, NERC allows 313.50 to 346.50 kV. In October the lower average was 305.00 kV and the upper average 353.94 kV, outside at both ends.
These are figures for the big transmission lines, not your socket. But a network that swings this much is harder to keep steady all the way to your street.
What it means for you
A shaky grid means more sudden outages, even on days when there is enough power. It is also why a voltage stabiliser or surge protector is worth having for a fridge, freezer or TV. Each month NERC publishes these figures. If the averages move back inside the bands, expect fewer sudden blackouts.
Words to know
- Hertz (Hz)
- A count of cycles per second. Nigeria's power is meant to switch direction 50 times every second.
- Voltage
- The push that drives electricity along a wire. Too low and equipment struggles; too high and it can be damaged.
- Trip
- When a safety device switches off a line or a power station automatically to protect it.
Sources
- NERC: NERC publishes October operational performance factsheet (11 Nov 2026)
- TheFact Daily: Nigeria's grid breaches frequency, voltage limits in October as generation averages 4,047MW (11 Nov 2026)
Spotted an error? Tell us and we will fix it and say so.